AIS BS610
Automatic identification system
The AIS BS610 is a product in the new generation AIS Base Station range from Kongsberg Seatex. It has a sensitivity better than -115 dBm and 1U 19’’ rack mountable smooth design. The AIS BS610 is designed and tested in accordance with all relevant international standards including IEC 62320-1 and ITU M-1371.
Essential Component of AIS Network
The AIS Base Station is the primary component in an Hot stand-by AIS Physical Shore Station (PSS), and therefore the most vital component in a coastal AIS network. The AIS BS610 receives and communicates AIS data from all AIS sources: AIS mobile stations, other AIS Base Stations, AIS Aids to Navigation units, Search and Rescue units etc, within the VHF coverage area. In order to obtain a very high level of service and availability, a redundant base station configuration can be established. Two AIS BS610 units will operate autonomously in such a configuration when connecting them with a 0-modem cable and enabling the redundancy functionality. In case of an automatic change in redundancy status, the control centre will be notified.
Enhanced Sensitivity and Remote Operations
The AIS system provides a valuable tool to increase the situation awareness, the efficiency of operations and safety. Experience shows that the workload for operators involved in vessel tracking and monitoring is considerably reduced after the introduction of AIS. Kongsberg Seatex has also developed satellite based AIS receivers and this space-based AIS technology has strong focus on receiver sensitivity. The high sensitivity has been incorporated in the AIS BS610. The increased sensitivity exceeds the requirements in international standards and regulations, and is an incredible enhancement in terms of signal reception. The AIS BS610 has an Ethernet/LAN interface, making it easy to interface the base station to other equipment or data networks. From the AIS Central Monitor Application Suite a single AIS BS610, or a network of base stations, can be remotely operated and maintained. The AIS BS610 also supports configuration and firmware upgrade via a web interface. All base station functions can be configured and effectuated remotely via this interface.
Transmission and Reception Capabilities
The AIS BS610 is able to broadcast DGNSS corrections through the standardized AIS message 17. Hence, differential corrections can be transmitted to all vessels which carry an AIS mobile station if the vessel is located within the base station’s coverage area. The AIS BS610 boosts its functionality with a VHF antenna and supports various power configurations and interfaces for operational flexibility. It also features RTCM v.2.3 support for reception of DGPS corrections on LAN, and can manage three remotely configurable receivers (TDMA/DSC). Other functionalities include USB interface for firmware upgrades, transmission of virtual AtoN, and AIS repeater functionality in accordance with IEC 62320-3. It also offers redundancy support and can support 10 parallel consecutive TCP connections.
Key features
- Sensitivity better than -115 dB
- SNMP v.2
- Optional combined 100 to 240 VAC and 24 VDC (10-36 VDC) version
- Optional combined 100 to 240 VAC and 48 VDC (36-75 VDC) version
- WEB interface for remote configuration and SW upgrade
- RTCM v.2.3 support for reception of DGPS corrections on LAN
- Three remotely configurable receivers (TDMA/DSC)
- USB interface for firmware upgrade
- Transmission of virtual AtoN, implementation of a subset of IEC 62320-2 functionality
- AIS repeater functionality in accordance with IEC 62320-3
- Redundancy support (RS-232)
- Supporting NTP as client and server
- Available auxiliary equipment enabling functionality such as: AIS BS 610
- Separate or combined transmitting and receiving antennas
- Remotely controlled hard power reset of PSS equipment
- DGNSS reference and monitor stations
- Supporting 10 parallel consecutive TCP connections
Product range
Find your local dealership
Our global dealership network enables distribution to more than 100 countries to meet customer needs at any location. Find your local dealership here.
We offer comprehensive after-sales assistance
-
24/7 Technical support
Our Technical Support team is readily available to provide global 24/7 support and can respond to resolve any issues at any time, wherever you are located in the world.
-
Training
We can provide detailed training on the use of our products to ensure your crew is equipped with the necessary operational competence to minimise technical risk and maximise return on your asset investment.