Simrad ES18
18 kHz split-beam transducer
The ES 18 is a split-beam transducer incorporating 44 Tonpilz elements distributed over four quadrants. The following specifications are valid when all four quadrants are connected in parallel.
About
The ES18 beamwidth is 11 degrees at nominal operational frequency 18 kHz. The transducer uses 44 "tonpilz" elements organized in four separate sectors.
Due to its low frequency, the Simrad ES18 is ideal for use with deep water measurements. Maximum range is approximately 7000 meters.
Transducers
The transducer is normally mounted flush with the hull plating or the bottom of a blister. The incorporated clamping ring is used to secure the transducer body to a mounting ring. The mounting ring is welded into the hull plating. The transducer can also be flush-mounted in the same manner at the bottom of a blister or a drop keel.
The transducer cable penetrates the hull using a cable gland. This cable gland consists of a bushing, washers, a rubber gasket and a packing nipple.
We offer comprehensive after-sales assistance
-
24/7 Technical support
Our Technical Support team is readily available to provide global 24/7 support and can rapidly respond to resolve any issues at any time, wherever your vessel is located in the world.
-
Training
We can provide detailed training on the use of our products to ensure your crew is equipped with the necessary operational competence to minimise technical risk and maximise return on your asset investment.
Find your local dealership
Our global dealership network enables distribution to more than 100 countries to meet customer needs at any location. Find your local dealership here.