Skip to main content

Simrad PI Geometry Sensor identification

Identification of main sensor

The Simrad PI Geometry is an "L-Type" sensor. It is approximately 305 mm long, 200 mm wide, and weighs approximately 5,6 kg in air.

Order numbers:

  • Simrad PI Geometry sensor: 316861

bm012226-011_0300_pi_geometry.gif

A: Negative charging and fastening lug
B: Positive charging and fastening lug
C: Communication link to the vessel and to the responders
D: Geometry set identification
E: Location of water switch and sensor identification label

bm012226-012_0400_pi_geometry.gif

A: Channel identification
You must write down the channel currently used by the sensor to communicate with the PI system.

B: This information identifies the sensor type
C: Order number
D: Water switch. This is a sacrificial bolt.
The bolt will gradually be worn out. Check it from time to time to remove corrosion, or replace it if necessary.