Skip to main content

Simrad SX90 Hull Units

The Simrad SX90 fish finding sonar can be provided with one of the following hull units.

Simrad SX92: 1.2 m stroke length
Simrad SX93: 1.6 m stroke length
Simrad SX95: 1.0 m stroke length

Simrad SX92 Hull Unit

The Simrad SX92 hull unit is intended for medium and large fishing vessels.

It will lower the transducer to 1,2 meters under the hull. The maximum vessel speed with the transducer lowered is 25 knots.

The transducer is lowered and hoisted by means of remote control. A single Ethernet cable connects the Motor Control Unit to the Transceiver Unit. In case of a power failure, the transducer can be hoisted manually by means of a hand crank.

cd015404k_sp90_hull_unit_parts_identification.jpg

A. Upper limit switch
B. Transducer shaft
C. Lower limit switch
D. Hand crank for manual hoisting and lowering
E. Hoist motor
F. Brake release screw
G. Motor Control Unit
H. Hoisting unit
I. Mounting flange
J. Installation trunk
K. Transducer
L. Transducer shaft sleeve
M. Identification label

Simrad SX93 Hull Unit

The Simrad SX93 hull unit is intended for medium and large fishing vessels.

It will lower the transducer to 1,6 meters under the hull. The maximum vessel speed with the transducer lowered is 20 knots.

The transducer is lowered and hoisted by means of remote control. A single Ethernet cable connects the Motor Control Unit to the Transceiver Unit. In case of a power failure, the transducer can be hoisted manually by means of a hand crank.

cd015404k_sp90_hull_unit_parts_identification.jpg

A. Upper limit switch
B. Transducer shaft
C. Lower limit switch
D. Hand crank for manual hoisting and lowering
E. Hoist motor
F. Brake release screw
G. Motor Control Unit
H. Hoisting unit
I. Mounting flange
J. Installation trunk
K. Transducer
L. Transducer shaft sleeve
M. Identification label

Simrad SX95 Hull Unit

The Simrad SX95 hull unit is intended for smaller fishing vessels.

It will lower the transducer to 1 meter under the hull. The maximum vessel speed with the transducer lowered is 12 knots.

The transducer is lowered and hoisted by means of remote control. A single Ethernet cable connects the Motor Control Unit to the SX90 Transceiver Unit. In case of a power failure, the transducer array can be hoisted manually by means of a hand crank.

cd015414-003_sx95_complete_side_view.jpg

A. Hand crank
B. Identification label
C. Hoisting motor
D. Motor Control Unit
E. Hoisting unit
F. Transducer shaft sleeve
G. Mounting flange
H. Mounting trunk
I. Transducer
J. Transducer cable
K. Transducer shaft
L. Air bleeding cock
M. Zinc anodes