Gyro Compass for ships / high-speed crafts - MGC R2
The MGC R2 COMPASS system is IMO type approved as gyro compass for navigation purposes for use together with a heading and bearing repeater. Very high reliability is achieved by using Ring Laser Gyros with no rotational or mechanical wear-out parts.
The system can be operated as an inertial navigation system as well as a gyro compass with output of position and heading. Linear position and velocity measurements can then be output in up to four different points on the vessel.
The MGC is a strap-down based gyro compass including three Ring Laser Gyros (RLG) and three linear accelerometers. The system can operate in Attitude and Heading Reference System (AHRS) mode and Inertial Navigation mode. In the AHRS mode input of speed and latitude data (VBW/VTG and GGA/GLL) is required. External time input is also required (ZDA). In this mode the system will output heading, roll, pitch and heave. In the Inertial Navigation mode input of latitude, longitude, height and time (GGA and ZDA) and PPS from a GNSS receiver is required. In this mode the product will output heading, roll, pitch, heave and position.
The system is delivered with Windows based configuration software, MRC+. In this software the user selects output formats on the different communication lines in addition to other configuration purposes.
Digital I/O protocols
MGC data is available through both Ethernet interface and serial lines enabling easy distribution of data to multiple users on board the vessel. Output protocols for commonly used equipment are available on five individually configurable serial lines and five Ethernet/UDP ports.