Skip to main content


-Ensuring mission success

The Minesniper Mk III Weapon is a light weight and low cost one-shot vehicle for rapid and efficient mine verification and neutralization.

The Minesniper system provides automatic navigation and reduces operator load by its intuitive operator interface.

The system has a modular design, allowing integration on different platforms.

The unique integration of the shaped charge in the vehicle allows the energy beam to be fully focused, burn through the surface of the mine and set off 

Software based simulation and training available on target system or dedicated classroom hardware.


Fast and manoeuvrable due to its midpoint location of thrusters. Sonar, LED lights and Video Camera for relocation and visualization of target. Safety and Arming Unit
(SAU) with two safety pins and hydrostatic arming. Aft compartment with Li-Ion Battery Package and Fibre Bobbin. Mechanical interface for drop launch.
Minesniper has an integrated dual frequency transponder to support navigation based on dedicated acoustic positioning system and/or MMCM vessel sonar.


The graphical user interface is designed to support logical work flow to the operator, with selection of mission, vehicle preparation and integrity check, preparation of
weapon system and launch, and main screen providing camera tool, sonar tool, tactical tool, functions and information.
The Control Grip buttons enable fast and easy operation of main functions. The graphical user interface supports touch operation. The integrated Intercom system is
used to communicate with deck operator. The Camera tool provides information overlay and active target guidance. The Mission Log records screen and voice.


  • Crane based Drop Launcher
  • Crane based Recovery Basket
  • Vehicle Handling Tool
  • Fibre Winch
  • Deck Interface Panel
  • Deck Control Unit


  • Console
  • Minesniper Control Unit
  • WAP Acoustic Positioning Unit
  • Storage racks (for vertical or horizontal storage)
  • Battery Charger


  • Effective against moored, drifting, shallow water and bottom mines
  • Powerful shaped charge ensures full order detonation of any known mine (Insensitive or Sensitive Munitions)
  • Ready to launch in 15 minutes
  • Fast and very manoeuvrable
  • GUI designed with Navy users
  • Control grip and touch screen operation
  • Ready for next generation MMCM operations from unmanned platforms

Technical Data

Length                                      1650 mm
Diameter hull / thrusters           190 / 511 mm
Weight in air                              42.0 kg (launch ready)
Endurance                                60 minutes at 3 knots
Range                                       6000 m at 2.5 knots
Speed                                       5.2 knots (max)
Turn rate                                   32 degrees / sec
Pitching angle                          ±55 degrees
Operational depth                    310 m (max)
Storage temp                           -30°C to +70°C
Operational temp                     -5°C to +35°C (water)
Thermal Shock                         -30°C to +5°C (air to water)
NEQ                                          3.5 kg PBX-110 (IM)



Data Sheet